Adolescents with symptomatic laminolysis: report of two cases

Retroisthmic cleft refers to a cleft in the lamina and is rarely reported. It was first described by Brocher, and later Wick et al. proposed the term “laminolysis” to describe the retroisthmic cleft by analogy with the nomenclature of the applied stress fracture of the pars interarticularis (spondylolysis) and the pedicle (pediculolysis). In this paper, we describe two adolescent sports players with symptomatic lumbar laminolysis. Both improved significantly after adequate conservative treatment. Knowledge of laminolysis in adolescent patients with low back pain is necessary to avoid overlooking it and late diagnosis. For correct diagnosis, multidetector three-dimensional computed tomography (CT) is suggested. In addition, magnetic resonance imaging (MRI) also allows detection of inflammation in the defects

Biomechanical evaluation of predictive parameters of progression in adolescent isthmic spondylolisthesis: a computer modeling and simulation study

<p>Abstract</p> <p>Background</p> <p>Pelvic incidence, sacral slope and slip percentage have been shown to be important predicting factors for assessing the risk of progression of low- and high-grade spondylolisthesis. Biomechanical factors, which affect the stress distribution and the mechanisms involved in the vertebral slippage, may also influence the risk of progression, but they are still not well known. The objective was to biomechanically evaluate how geometric sacral parameters influence shear and normal stress at the lumbosacral junction in spondylolisthesis.</p> <p>Methods</p> <p>A finite element model of a low-grade L5-S1 spondylolisthesis was constructed, including the morphology of the spine, pelvis and rib cage based on measurements from biplanar radiographs of a patient. Variations provided on this model aimed to study the effects on low grade spondylolisthesis as well as reproduce high grade spondylolisthesis. Normal and shear stresses at the lumbosacral junction were analyzed under various pelvic incidences, sacral slopes and slip percentages. Their influence on progression risk was statistically analyzed using a one-way analysis of variance.</p> <p>Results</p> <p>Stresses were mainly concentrated on the growth plate of S1, on the intervertebral disc of L5-S1, and ahead the sacral dome for low grade spondylolisthesis. For high grade spondylolisthesis, more important compression and shear stresses were seen in the anterior part of the growth plate and disc as compared to the lateral and posterior areas. Stress magnitudes over this area increased with slip percentage, sacral slope and pelvic incidence. Strong correlations were found between pelvic incidence and the resulting compression and shear stresses in the growth plate and intervertebral disc at the L5-S1 junction.</p> <p>Conclusions</p> <p>Progression of the slippage is mostly affected by a movement and an increase of stresses at the lumbosacral junction in accordance with spino-pelvic parameters. The statistical results provide evidence that pelvic incidence is a predictive parameter to determine progression in isthmic spondylolisthesis.</p

Natural history of extruded lumbar intervertebral disc herniation

We studied the natural history of extruded lumbar intervertebral discs using MRI. Forty-nine patients with lumbar disc herniation were included in this study. Ages ranged from 19 to 57. On the T2-weighted sagittal MR image, the signal intensity in the herniated mass was measured and the ratio to that in the original nucleus (i.e, nucleus pulposus from which they extruded) was calculated (signal intensity ratio ; SIR). The relationship with SIR and duration of illness was evaluated. In ten patients who were re-examined by MRI after conservative treatment, the size of the herniation measured by T1-weighted axial MR image was compared before and after treatment. The signal intensity of HNP became higher than that of the original nucleus immediately following herniation and thereafter decreased with time, suggesting that initial hydration of the HNP occurred shortly after herniation followed by dehydration of the HNP. The size of the HNP with a SIR value of 1.2 and higher on T2-weighted MR images decrease with time, however, the HNP with a SIR below 1.2 did not show any size reduction. The SIR of 1.2 and higher is a good indicator predicting spontaneous reduction of the HNP. Dehydration in the HNP may play an important role in the reduction of the lumbar disc herniation

Role of Epiligament in Ligamentum Flavum Hypertrophy in Patients with Lumbar Spinal Canal Stenosis : a Pilot Study

Ligamentum flavum (LF) hypertrophy is one of the main factors of lumbar spinal canal stenosis (LSCS). The primary object of this study is to clarify the existence of epiligament in the LF and its role in hypertrophy, and to develop an LF hypertrophy animal model. A cadaveric spine from a 30-year-old man was used to investigate the existence of epiligament in LF. Five LF samples from LSCS patients were obtained to evaluate hypertrophied LF. To create a rat model, we destabilized the lumbar spine. Each LF was sagittally cut for histological evaluation. The epiligament was clearly evident in normal LF specimens, which stained pink on Elastica van Gieson and green on Masson Trichrome. Onelayer was observed on the dural side and another on the dorsal side of the LF. LSCS patients had an enlarged dorsal epiligament, at around 30 times that of the regular thin epiligament on the dural side. The destabilized rat model showed an enlarged dorsal epiligament, with a mean thickness 8-fold that of the control. LF hypertrophy may be due to enlargement of the dorsal epiligament. Mechanical loading of the LF is an important factor for inducing hypertrophy in the rat model

Osseous erosion by herniated nucleus pulposus mimicking intraspinal tumor: a case report

Erosion of spinal osseous structure, so-called scalloping, has been rarely reported associated with herniated nucleus pulposus (HNP). We report a rare case of HNP causing erosion of the spinal osseous structure (including lamina). The patient was an 81-year-old woman with 3-year history of low-back pain and left leg radiating pain. Muscle weakness of the left leg was also apparent. Computed tomography following myelography showed severe compression of the dural sac at the level of L3–L4; furthermore, erosion of the lamina, pedicle, and vertebral body was noted, indicating that the space-occupying mass was most probably a tumorous lesion. The mass also showed calcification inside. During the surgery, the mass was confirmed to be an HNP with calcification. Following resection, the pain disappeared. Surgeons should be aware of the possibility of scalloping of the vertebrae caused by HNP mimicking a tumorous lesion

FEM Simulation of Non-Progressive Growth from Asymmetric Loading and Vicious Cycle Theory: Scoliosis Study Proof of Concept

Scoliosis affects about 1-3% of the adolescent population, with 80% of cases being idiopathic. There is currently a lack of understanding regarding the biomechanics of scoliosis, current treatment methods can be further improved with a greater understanding of scoliosis growth patterns. The objective of this study is to develop a finite element model that can respond to loads in a similar fashion as current spine biomechanics models and apply it to scoliosis growth. Using CT images of a non-scoliotic individual, a finite element model of the L3-L4 vertebra was created. By applying asymmetric loading in accordance to the ‘vicious cycle’ theory and through the use of a growth modulation equation it is possible to determine the amount of growth each region of the vertebra will undergo; therefore predict scoliosis growth over a period of time. This study seeks to demonstrate how improved anatomy can expand researchers current knowledge of scoliosis

Biomechanical analysis of the lumbar spine on facet joint force and intradiscal pressure - a finite element study

<p>Abstract</p> <p>Background</p> <p>Finite element analysis results will show significant differences if the model used is performed under various material properties, geometries, loading modes or other conditions. This study adopted an FE model, taking into account the possible asymmetry inherently existing in the spine with respect to the sagittal plane, with a more geometrically realistic outline to analyze and compare the biomechanical behaviour of the lumbar spine with regard to the facet force and intradiscal pressure, which are associated with low back pain symptoms and other spinal disorders. Dealing carefully with the contact surfaces of the facet joints at various levels of the lumbar spine can potentially help us further ascertain physiological behaviour concerning the frictional effects of facet joints under separate loadings or the responses to the compressive loads in the discs.</p> <p>Methods</p> <p>A lumbar spine model was constructed from processes including smoothing the bony outline of each scan image, stacking the boundary lines into a smooth surface model, and subsequent further processing in order to conform with the purpose of effective finite element analysis performance. For simplicity, most spinal components were modelled as isotropic and linear materials with the exception of spinal ligaments (bilinear). The contact behaviour of the facet joints and changes of the intradiscal pressure with different postures were analyzed.</p> <p>Results</p> <p>The results revealed that asymmetric responses of the facet joint forces exist in various postures and that such effect is amplified with larger loadings. In axial rotation, the facet joint forces were relatively larger in the contralateral facet joints than in the ipsilateral ones at the same level. Although the effect of the preloads on facet joint forces was not apparent, intradiscal pressure did increase with preload, and its magnitude increased more markedly in flexion than in extension and axial rotation.</p> <p>Conclusions</p> <p>Disc pressures showed a significant increase with preload and changed more noticeably in flexion than in extension or in axial rotation. Compared with the applied preloads, the postures played a more important role, especially in axial rotation; the facet joint forces were increased in the contralateral facet joints as compared to the ipsilateral ones at the same level of the lumbar spine.</p